The Product Range of Our Company Previous Model Next Model

The Cyclic Timer Model:
This model is a cyclic timer without level control which is suitable for Borewells with limited water source to operate periodically.
In some places Borewells will pump water for few minutes ranging from 3 miutes to 30 minutes and after which it will stop pumping partaining to lowering of water table in the bore. The water table will resume after some time which again ranges from one hour to 10 hour. In such cases the pump has to be operated with required ON duration and OFF duration.

  • The system can be programmed to set the ON duration to which the pump has to be operated.
  • The system has four digit seven segment LED display of time and programming.
  • There are only three push button membrane key switches for complete programming procedure.
  • The system has built-in memory to store the status of operation and Programmed ON and OFF time duration.
  • The system memory is nonvolatile, i. e. it retains all the stored information even in case of power failure.
  • The system comes with Industrial Grade Electronic Components, Reliable Power Supply and Power Contactor in power coated metalic Enclosure.
  • The system is adoptable for any kind of starters of both Single phase and Three phase Motors.
  • This system is suitable for Residences, Commercial complexes, Residential Apartments and Industries.
  • The system has three position Power Control Toggle Switch with "Auto" mode, "Off" mode and "Manual" mode.
  • In "Manual" mode the Pumpset can be controlled directly and level controller gets completely shutdown and bypassed.
  • The system comes with Unconditional One Year Guarantee.